Amateur radio antennas, circuits, techniques and related topics. By Peter Parker VK3YE/AK3YE.
Newer material appears at https://vk3ye.com and https://youtube.com/vk3ye .
PS: Enjoy these well-reviewed books on various amateur radio topics. They're available for under $US 5 each in electronic form. Or you can get them in paperback. Visit VK3YE Radio Books to find out more.
When you ask people the first project that got them interested in radio was, 'crystal set' is often mentioned. For a younger generation it was probably 'FM bug'. Yes, wireless microphones were (and are) great for both learning and pranks. Their sensitivity can be surprising as can their transmitting range. There's amateur radio uses as well. For example you could use one as a short range link to allow you to monitor shack equipment from the house.
If you want to relive the bug-building experience, here's a few links to try.
One of the items picked up at the recent hamfest (see yesterday's post) was a UHF frequency counter. It worked but was off frequency. Adjusting the trimmer capacitor helped but not enough. Here's how I got it on frequency.
"Hamfests aren't as good as they used to be". That's a common lament. Is it true? Or is it because hams tend to accumulate junk with age and there's less and less they really need.
Anyway here's some finds at a local hamfest held on Saturday. I also test some of them. I think this has been one of my best hamfest hauls.
PS: What have been your best hamfest finds? Please share them in the comments below.
Many beginner amateurs start off with a VHF/UHF handheld FM transceiver (or more recently) one also featuring digital voice modes. Experiences with this shape their view of what VHF/UHF frequencies can do. That is a reliance on repeaters and local communications unless an internet link is involved. Later on they may get on the HF bands to work longer distances. Others may have started on HF, remained with this as their first interest and only got VHF for local FM contacts. People in both groups have missed out VHF/UHF SSB and the experience of their attributes.
These videos have been collated to indicate what is possible on 6m, 2m and (to a lesser extent) 70cm SSB. All involve contacts with low power and basic antennas. Yet the distances achieved often exceed that normally achieved on FM, even with repeaters.
Why is this so? The first thing is that per watt SSB is more efficient than FM. This is because of SSB's narrower bandwidth and the characteristics of FM which make it great when signals are strong but less readable when signals are weak.
Secondly (on average) SSB operators have better stations, antennas and equipment than average FM operators. It's not true in all cases but many FM operators only need to access repeaters and talk locally on simplex. A small improvement to antenna gain will often go unnoticed. Whereas SSB operators who work direct to each other, often over extended distances, will notice even small increases in gain. The combination of a taller mast and substituting a small beam for a vertical will increas your singnal by 10dB on a band like 2 metres. Another 10dB gain is possible by increasing power from (say) 30 to 300 watts. That's good but if you combine that with a distant station who likewise improves their antenna and output power by similar amounts then there's a massive improvement in signals between the two stations.
And I haven't even factored in other upgrades such as lower loss feedline, masthead preamplifiers, portable locations or modes even more efficient than SSB such as CW and the increasing family of digital modes used on VHF/UHF.
Facets of VHF/UHF SSB vary and can include DXing, contesting, local nets, satellite communication, experimentation, antenna work, aircraft enhancement, EME (moonbounce) and more. Activity is not always immediately apparent but if you listen and tune around long enough as well as familiarises yourself with local patterns you will find it.
Video demonstrations
These videos show what's possible with VHF and UHF SSB with low power and modest antennas. In all cases I'm running 5 watts or less. Antennas used have included small loops on 6m and, on 2m and 70cm, dipoles or small beams. In no case am I transmitting from great heights. Some contacts have been made pedestrian mobile. Typical ranges for this are 30 to 100km, with over 2000km occasionally possible on 6 metres during sporadic E openings.
6 metres pedestrian mobile
VHF/UHF Field Days (mostly 2m SSB)
2m SSB portable results in response to an alert that the band was open
Pedestrian mobile 2m and 70cm SSB
Equipment and antennas
I've used a Yaesu FT-817 as this suits my style of portable work. Larger 'All-in-one' HF/VHF/UHF transceivers typically include at least 6 and 2m SSB. Antennas vary greatly in size but even a small beam is enough to get you started.
Operating
Operating is quite different to both HF and VHF/UHF FM/repeaters.
If you were to turn on at a random time, the chances are that you will hear no one at all. In many areas there is activity but it's harder to find than on HF. It may be heavily based on nets and regular operating periods during the week. For example here in VK3 we have a 70cm SSB net on Monday evenings (7:30pm 432.310 MHz), a vertically polarised 2m SSB net on Tuesday evenings (7:30pm 144.310 MHz), a Wednesday evening 2m SSB horizontally polarised net (8:30pm 144.150 MHz), a Thursday evening 6m SSB net in Bendigo (9:00pm 52.250 MHz) and aircraft-enhancement activity on weekend mornings. That doesn't include other spontaneous activity. So you're pretty much guaranteed activity on most days if you're around at the right time.
To improve your chances, familiarise yourself with beacons, calling frequencies, local field days and nets including looking up club newsletters, joining social media groups and searching the web. And not to mention old-fashioned tuning around and asking people you work.
What have been your experiences with VHF/UHF SSB? Please leave your comments below.
PS: Enjoy these well-reviewed books on various amateur radio topics. They're available for under $US 5 each in electronic form. Or you can get them in paperback. Visit VK3YE Radio Books to find out more.
Regenerative receivers infuriate some but fascinate me. Badly built ones can squeal and drift but a well built set, picking up signals from around the world with just one or two transistors, is a thing of beauty.
If you are not familiar with a regenerative receiver they use positive feedback (regeneration) that increases a circuit's gain. This also increases its selectivity to allow it to better pick signals out. And when the detector is lightly oscillating it produces a beat signal useful for receiving CW and SSB signals.
Here are some regens I have tried.
Listening with an HF regenerative receiver
An older HF regenerative receiver (but still solid state)
OK this is a pretty arcane topic that might not interest that many.
And I had forgotten about this video until reminded by a comment in a Soldersmoke blog.
But I'm quite proud of it. Especially the analogue transparent plastic graphics and sound.
Watch it if you like to know a bit more about direct conversion CW transceivers and the receive/transmit frequency shifts they need to function properly.
PS: Enjoy these well-reviewed books on various amateur radio topics. They're available for under $US 5 each in electronic form. Or you can get them in paperback. Visit VK3YE Radio Books to find out more.
I've owned a variety of receivers over the years. Good and bad. Here's a few words about them and accompanying videos. Most aren't current models so you'll need to look on the secondhand market to find them. Note that some of the early videos are a bit blurry but they get better later on.
Astor radiogram
The one that started it all for me. Had three shortwave bands - 19, 25 and 31 metres - so I could only hear broadcast stations (and WWV). But its bandspread was good so tuning was easy.
National Panasonic GX3
The standard 1970s receiver with AM, FM and a shortwave band or two. Terrible frequency readout and tuning resolution and they can drift a bit. But work with SSB with a BFO at signal frequency.
Optimus Extended Range receiver
Basically Radio Shack/Tandy answer to GE's Super Radio - but apparently not as good. Good for broadcast band reception.
Sony SRF-59
A tiny receiver but a very special design. Incredibly good AM broadcast band performance. Prized by lightweight DXers.
Digitech AR1748
This is the big chunky receiver you see me using in the first photo. Quite good for AM and FM but not having a BFO limits its use on shortwave.
Digitech AR1780
This is my current 'go to' general coverage portable receiver. I like it. It has a wide tuning range (more than stated in the instructions) and is quite sensitive, selective and stable. Its only annoyances are its memories are difficult to use and it seems to draw a bit of current from the batteries when switched off.
PS: Interested in buying a new receiver? Browse these links. They are affiliate links meaning that I receive a small commission (at no extra cost to you) if you decide to purchase.
PS: Enjoy these well-reviewed books on various amateur radio topics. They're available for under $US 5 each in electronic form. Or you can get them in paperback. Visit VK3YE Radio Books to find out more.
The very popular FT8 mode has its place for 'rubber stamp' exchanges but isn't a chat mode.
News crept out of a more conversational version called FT8Call where you could enter free text.
That morphed into JS8Call.
It was under development for a while.
Now you can download the release version and start chatting keyboard to keyboard under weak signal conditions.
What's JS8Call like? Watch this video, of my first JS8Call contact, and find out!
PS: Want to support The Daily Antenna? Please start your Amazon shopping here. You won't be charged extra and I'll get a small cut from any purchases you make (affiliate link). You can buy lots of stuff there, including electronic parts and my books. And for those in it, today is Amazon Prime Day, where members may get special offers.
Probably the cheapest multiband HF SSB amateur transceiver you can get is the uBitx, designed by Ashhar Farhan VU2ESE. It's a kit but with the main board assembled. You just need to find a box and solder up the connections to the external power, speaker, antenna, microphone, and key sockets. And make a few other adjustments (which can be a bit tricky).
It's not perfect. Operating isn't as smooth as say a Yaesu FT817 or 818. But the kit has been refined over time. This portable session is a taste of what it's like on-air.
A lot has been written online about the uBitx. I've done a few videos myself. I've put together a few of the best resources about it on my website here.
PS: The uBitx is a QRP-ish transceiver. Want to get the most from it? Minimum QRP is what you need. This top-selling manual covers the equipment, antennas, operating and strategy needed to be successful with low power amateur radio. Available for under $US 5 as an ebook. Or in paperback form (some countries). Click here to find our more and to see reader reviews.
